Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005




Скачать 204.84 Kb.
НазваниеTechnology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005
Дата конвертации12.02.2013
Размер204.84 Kb.
ТипДокументы
FederalRegister

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 - April 25 , 2005

Compiled under ANSI contract from on line database by GTWAssociates 

Topic Safety standards, cigarette lighters BicyclesSurface Flammability of Carpets and Rugs

Date-Document-Sources 4/11/2005 05–7105 CPSC TEXT PDF

Standard Ref minimum standards for the surface flammability of carpets and

rugs when exposed to a standard small source of ignition

Discussion The Consumer Product Safety Commission (CPSC or Commission)

announces its fiscal year 2005 program for systematic review of its

current substantive regulations to ensure, to the maximum practical

extent, consistency among them and with respect to accomplishing

Note Safety Standards for Cigarette Lighters and Multi-Purpose Lighters

The safety standards for cigarette lighters and multi-purpose

lighters appear at 16 CFR parts 1210 and 1212. These rules were

Topic Comment Request; Servicing of Motor Vehicle Air Conditioners, EPA ICR

Number 1617.05, OMB Control Number 2060-0247

Date-Document-Sources 4/11/2005 05–7222 EPA TEXT PDF

Standard Ref Society of Automotive Engineers (SAE) standards for recycled

refrigerant,

Discussion Affected entities: Entities potentially affected by this action are

new and used motor vehicle dealers, gasoline service stations, truck

rental and leasing without drivers, passenger car rental, top, body,

upholstery repair and paint shops, general automotive repair shops, and

Note The information required to be collected includes the following:

submission of a program plan to EPA by organizations who want to

participate as an EPA-technician certification program, submission of

an application by independent laboratories that proves their general

Topic Special Conditions: Airbus Model A320 Airplanes; Child Restraint

System

Date-Document-Sources 4/11/2005 05–7195 FAA TEXT PDF

Standard Ref static test requirements of SAE AS 8043, ``Torso Restraint Systems

Discussion These amended special conditions are for Airbus Model A320

airplanes. These airplanes, as modified by AMSAFE Inc., will have the

novel and unusual design feature of a child restraint system that

attaches to the existing passenger lap belt. Special Conditions No. 25-

Note 1. The child safety system (CSS), when used in conjunction with a

standard two-point lap belt system, must provide upper and lower torso

restraint for the range of occupant sizes for which the system is

designed in accordance with sections 2.3 and 2.4 of the Society of

Topic Certain Hot-Rolled Carbon Steel Flat Products from the

Netherlands; Final Results of Antidumping Duty Administrative Review

Date-Document-Sources 4/11/2005 E5–1657 DOC TEXT PDF

Standard Ref Society of Automotive Engineers (SAE)/American Iron and

Steel Institute (AISI)ASTM specifications A710 and A736

Discussion On December 3, 2004, the Department of Commerce (the

Department) published the preliminary results of the administrative

review of the antidumping duty order on certain hot-rolled carbon steel

flat products from the Netherlands. See Certain Hot-Rolled Carbon Steel

Note All products that meet the physical and chemical description

provided above are within the scope of this order unless otherwise

excluded. The following products, by way of example, are outside or

specifically excluded from the scope of this order:

Topic Stainless Steel Sheet and Strip in Coils From Japan: Preliminary

Results of Antidumping Duty Administrative Review

Date-Document-Sources 4/11/2005 E5–1655 DOC TEXT PDF

Standard Ref (ASTM) specification B344

Discussion In response to timely requests by the petitioners,\1\ the

Department of Commerce is conducting an administrative review of the

antidumping duty order on stainless steel sheet and strip in coils from

Japan with respect to one company. The period of review is July 1,

Note Certain electrical resistance alloy steel is also excluded from the

scope of this order. This product is defined as a non-magnetic

stainless steel manufactured to American Society of Testing and

Materials (ASTM) specification B344 and containing, by weight, 36

Topic Safety Standard for Cigarette Lighters; Advance Notice of

Proposed Rulemaking; Request for Comments and Information

Date-Document-Sources 4/11/2005 05–7106 CPSC TEXT PDF

Standard Ref voluntary standard ``Standard Consumer Product

Safety Specification for Lighters'' (ASTM F-400)

Discussion Cigarette lighters may present an unreasonable risk of injury

due to mechanical malfunction of some lighters. In November 2001, the

Commission received a petition from the Lighter Association, Inc.

asking the Commission to adopt the voluntary ``Standard Consumer Safety

Note In November 2001, the Commission received a petition from the

Lighter Association, Inc., Petition CP 02-1, asking that the Commission

issue a rule to make the voluntary standard ``Standard Consumer Product

Safety Specification for Lighters'' (ASTM F-400) a mandatory consumer

Topic European Communities; nonuniform administration of customs laws, regulations, and judicial

decisions,

Date-Document-Sources 4/11/2005 05–7144 USTR TEXT PDF

Standard Ref the non-uniform administration by the European

Communities of laws, regulations, judicial decisions, and

Discussion The Office of the United States Trade Representative

(``USTR'') is providing notice that on March 21, 2005, in accordance

with the Marrakesh Agreement Establishing the World Trade Organization

(``WTO Agreement''), a the WTO Dispute Settlement Body (``DSB'')

Note On September 21, 2004, the United States requested consultations

with the European Communities pursuant to Articles 1 and 4 of the

Understanding on Rules and Procedures Governing the Settlement of

Disputes (``DSU''), and Article XXII:1 of the General Agreement on

Topic Biweekly Notice; Applications and Amendments to Facility Operating

Licenses

Date-Document-Sources 4/12/2005 05–6996 NRC TEXT PDF

Standard Ref Institute of Electrical and Electronics Engineers (IEEE) Standard 450-1995, ``IEEE

Recommended Practice for Maintenance, Testing, and Replacement of

Discussion amended (the Act), the U.S. Nuclear Regulatory Commission (the

Commission or NRC staff) is publishing this regular biweekly notice.

The Act requires the Commission publish notice of any amendments

issued, or proposed to be issued and grants the Commission the

Note A new program is being proposed for the maintenance and monitoring

of station batteries based on the recommendations of Institute of

Electrical and Electronics Engineers (IEEE) Standard 450-1995, ``IEEE

Recommended Practice for Maintenance, Testing, and Replacement of

Topic World Health Organization; International Programme on Chemical Safety

Date-Document-Sources 4/12/2005 05–7288 FDA TEXT PDF

Standard Ref international food standards established by the CAC are recognized by the World Trade

Organization (WTO)

Discussion The Food and Drug Administration (FDA) is announcing its intent to

accept and consider a single source application for the award of a

cooperative agreement to the World Health Organization (WHO) to support

the International Programme on Chemical Safety (IPCS). FDA anticipates

Note Competition is limited to the WHO/IPCS because it is the parent

organization of the Joint Food and Agriculture Organization (FAO)/WHO

Expert Committee on Food Additives (JECFA), which provides scientific

advice to the Codex Alimentarius Commission (CAC). The international

Topic Stratospheric ozone protection—

Refrigerant recycling; substitute refrigerants

Date-Document-Sources 4/13/2005 05–7407 EPA TEXT PDF

Standard Ref refrigerant recovery and recycling

requirements for CFC and HCFC refrigerants

Discussion The Environmental Protection Agency (EPA) is proposing changes

to correct the final rule published in the Federal Register on March

12, 2004. Specifically, EPA is proposing to amend the regulatory text

for the definitions of refrigerant and technician and the prohibition

Note Entities potentially regulated by this action include those that

manufacture, own, maintain, service, repair, or dispose of all types of

air-conditioning and refrigeration equipment (i.e., appliances as

defined by Sec. 82.152); those who sell, purchase, or reclaim

Topic National Emission Standards for Coke Oven Batteries; Final Rule

Date-Document-Sources 4/15/2005 05–6942 EPA TEXT PDF

Standard Ref ANSI/ASME PTC 19.10-1981, ``Flue and Exhaust Gas Analyses

Discussion SUMMARY: On October 27, 1993 (58 FR 57898), pursuant to section 112 of

the Clean Air Act (CAA), the EPA issued technology-based national

emission standards to control hazardous air pollutants (HAP) emitted by

coke oven batteries. This action amends the standards to address

Note ANSI/ASME PTC 19.10-1981, ``Flue and Exhaust Gas Analyses [Part

10, Instruments and Apparatus],'' I Consistent with the NTTAA, we conducted searches to

identify VCS in

addition to these EPA methods. No applicable VCS were identified for

Topic Notice of Antidumping Duty Order: Magnesium Metal From the

People's Republic of China

Date-Document-Sources 4/15/2005 E5–1790 DOC TEXT PDF

Standard Ref ASTM Specification for Magnesium Alloy''

Discussion Based on affirmative final determinations by the Department of

Commerce (``the Department'') and the International Trade Commission

(``ITC''), the Department is issuing an antidumping duty order on

magnesium metal from the People's Republic of China (``PRC''). On April

Note The merchandise covered by the order is magnesium metal, which

includes primary and secondary alloy magnesium metal, regardless of

chemistry, raw material source, form, shape, or size. Magnesium is a

metal or alloy containing by weight primarily the element magnesium.

Topic Notice of Antidumping Duty Order: Magnesium Metal From the

Russian Federation

Date-Document-Sources 4/15/2005 E5–1791 DOC TEXT PDF

Standard Ref ``ASTM Specification for Magnesium Alloy

Discussion Based on affirmative final determinations by the Department of

Commerce (the Department) and the U.S. International Trade Commission

(ITC), the Department is issuing an antidumping duty order on magnesium

metal from the Russian Federation (Russia). On April 11, 2005, the ITC

Note The subject merchandise includes the following pure and alloy

magnesium metal products made from primary and/or secondary magnesium,

including, without limitation, magnesium cast into ingots, slabs,

rounds, billets, and other shapes, and magnesium ground, chipped,

Topic NIST/Industry Consortium on Gene Expression Metrology

Date-Document-Sources 4/15/2005 05–7592 NIST TEXT PDF

Standard Ref development of measurement

methods of known quality for microarray gene expression results.

Discussion The National Institute of Standards and Technology (NIST)

invites interested parties to attend a pre-consortium meeting on May

16, 2005 to be held on the NIST campus in Boulder, Colorado. The goal

of the one-day meeting is to evaluate industry interest in creating a

Note Membership in the Consortium is open to manufacturers

of complete microarray gene expression systems (i.e. systems which

include all components required to measure a genome-wide expression

profile form isolated RNA). Consortium Members will be required to

Topic Controller Certification Pilot Program (CCERT),

Date-Document-Sources 4/15/2005 05–7638 DOT TEXT PDF

Standard Ref ASME) is now engaged in the development of a national consensus standard entitled ASME

B31Q, ``Pipeline Personnel

Discussion This notice seeks participants and provides information about

the certification study project affecting individuals who operate

computer-based systems for controlling the operation of gas and

hazardous liquid pipelines (pipeline controllers) and the associated

Note For the purposes of this overall project, tests refers to the

examination and evaluation of: (a) Current operator training and

qualification processes and practices (through the pilot operator

program), (b) current regulations, (c) industry standards, including

Topic Bowflex Power Pro Fitness Machines-Backboard Bench

Date-Document-Sources 4/16/2005 05–7682 CPSC TEXT PDF

Standard Ref Nautilus agrees to pay a civil penalty in the amount of $950,000.00

Discussion Bowflex Power Pro Fitness Machines-Backboard Bench

4. Between January 1995 and December 2003, Nautilus manufactured

and/or sold in commerce nationwide approximately 420,000 Bowflex Power

Pro Fitness Machines equipped with a Lat Tower and a backboard bench.

Note In settlement of the staff's allegations, Nautilus agrees to

pay a civil penalty in the amount of $950,000.00 as set forth in the

incorporated Order.

Commission ``knowingly'' as the term ``knowingly'' is defined in

Topic AP1000 Design Certification

Date-Document-Sources 4/18/2005 05–7658 NRC TEXT PDF

Standard Ref American Society of Mechanical Engineers Boiler & Pressure (ANSI/AISC)-690, and American

Iron and Steel Institute (AISI),

Discussion (NRC or Commission) proposes

to amend its regulations to certify the AP1000 standard plant design.

This action is necessary so that applicants or licensees intending to

construct and operate an AP1000 design may do so by referencing the

Note (1) Nuclear Island structural dimensions.

(2) American Society of Mechanical Engineers Boiler & Pressure

Vessel Code (ASME Code), Section III, and Code Case-284.

(3) Design Summary of Critical Sections.

Topic Consensus Standards, Light-Sport Aircraft

Date-Document-Sources 4/18/2005 05–7631 FAA TEXT PDF

Standard Ref ASTM International Committee F37 on Light Sport Aircraft d

Discussion availability of a consensus standard

relating to the provisions of the Sport Pilot and Light-Sport Aircraft

rule issued July 16, 2004, and effective September 1, 2004. ASTM

International Committee F37 on Light Sport Aircraft developed this

Note This notice announces the availability of a

consensus standard relating to the provisions of the Sport Pilot and

Light-Sport Aircraft rule. ASTM International Committee F37 on Light

Sport Aircraft developed this standard.

Topic Inspection and Maintenance Standards for Steam Locomotives

Date-Document-Sources 4/19/2005 05–7739 FRA TEXT PDF

Standard Ref Locomotive Inspection and Maintenance Standards

Discussion FRA proposes to correct an inadvertent, small omission from

FRA Form 4 (``Boiler Specification Card'') in the Steam Locomotive

Inspection and Maintenance Standards. The form is used to record

information about inspections of steam locomotive boilers.

Note FRA proposes to correct this oversight by adding the above language

to Form 4. Because the purpose of Form 4 is to document for FRA the

current condition of the boiler and to keep up-to-date documentation of

all repairs that have been made to the boiler, this omitted language is

Topic Electrical Standards for Construction (29 CFR part

1926, subpart K) and General Industry

Date-Document-Sources 4/20/2005 05–7941 OSHA TEXT PDF

Standard Ref Electrical Standards

Discussion OSHA is proposing to extend the information-collection requirements

contained in the Electrical Standards for Construction (29 CFR part

1926, subpart K) and General Industry (29 CFR part 1910, subpart S). In

doing so, the Agency is proposing to adjust the total burden hours of

Note OSHA has a particular interest in comments on the following issues:

Whether the proposed information-collection requirements

are necessary for the proper performance of the Agency's functions,

including whether the information is useful;

Topic information collection (paperwork) requirements

in its safety and health standards for general industry and the

Date-Document-Sources 4/20/2005 05–7939 OSHA TEXT PDF

Standard Ref safety and health standards for general industry and the

construction industry

Discussion In a series of Federal Register notices, the

Agency announced its requests to OMB to renew its current extensions of

approvals for various information collection (paperwork) requirements

in its safety and health standards for general industry and the

Note Access to Employee Exposure 12/19/2003, 68 FR 70840, 1218-0065

04/30/2007

and Medical Records (29 CFR Docket No. 1218-0065 (2004)

1910.1020).

Topic Natural Resources Conservation

Service's National Handbook of Conservation Practices

Date-Document-Sources 4/20/2005 05–7580 USDA TEXT PDF

Standard Ref 11 new or revised conservation practice standards

Discussion Notice is hereby given of the intention of NRCS to issue 11

new or revised conservation practice standards in its National Handbook

of Conservation Practices. These standards include: Alley Cropping

(Code 311), Prescribed Burning (Code 338), Multistory Cropping (Code

Note Section 343 of the Federal Agriculture

Improvement and Reform Act of 1996 requires NRCS to make available, for

public review and comment, proposed revisions to conservation practice

standards used to carry out the highly erodible land and wetland

Topic Food safety cooperative agreements,

Date-Document-Sources 4/20/2005 05–7955 USDA TEXT PDF

Standard Ref laboratory testing capability of the Food

Emergency Response Network for microbiological threat agents

Discussion FSIS continuously seeks new ideas and strategies to reduce the

incidence of foodborne illnesses associated with meat, poultry, and egg

products and protect the food supply. Agency innovations, notably those

associated with the implementation of Hazard Analysis and Critical

Note FSIS continuously seeks new ideas and strategies to reduce the

incidence of foodborne illnesses associated with meat, poultry, and egg

products and protect the food supply. Agency innovations, notably those

associated with the implementation of Hazard Analysis and Critical

Topic Maine Yankee Atomic Power Company; Issuance of Environmental

Assessment and Finding of No Significant Impact Regarding a Proposed

Date-Document-Sources 4/20/2005 E5–1854 NRC TEXT PDF

Standard Ref ANSI N45.2.9-1974

Discussion Identification of Proposed Action: By letter dated November 29,

2004, Maine Yankee requested an exemption from the requirement in 10

CFR 72.72(d) which states in part that, ``Records of spent fuel, high-

level radioactive waste, and reactor-related GTCC waste containing

Note The requirements in ANSI N45.2.9-1974 have been endorsed by the NRC

in Regulatory Guide 1.88 as adequate for satisfying the recordkeeping

requirements of 10 CFR Part 50, Appendix B, which states in part that

``records shall be identifiable and retrievable.'' Additionally,

Topic Federal Acquisition Regulation (FAR):

Radio frequency identification,

Date-Document-Sources 4/21/2005 05–7978 DOD TEXT PDF

Standard Ref Radio Frequency Identification Advance Shipment Notices.

Discussion DoD is proposing to amend the Defense Federal Acquisition

Regulation Supplement (DFARS) to add policy pertaining to package

marking with passive radio frequency identification (RFID) tags. The

proposed changes require contractors to affix passive RFID tags at the

Note This proposed rule contains requirements for contractors to affix

passive RFID tags at the case and palletized unit load levels. The

proposed rule requires that specified commodities delivered to

specified DoD locations be tagged with a readable passive RFID tag in

Topic Specifications and Drawings for 12.47/7.2 kV Line Construction

Date-Document-Sources 4/21/2005 05–7920 USDA TEXT PDF

Standard Ref ANSI class and size of spool insulator

Discussion The Rural Utilities Service (RUS), an agency delivering the

U.S. Department of Agriculture's Rural Development Utilities Programs,

is amending its regulations regarding RUS Bulletin 50-3, Specifications

Drawings for 12.5/7.2 kV Line Construction. This bulletin is currently

Note Pursuant to the Rural Electrification Act of 1936, as amended (7

U.S.C. 901 et seq.), the Rural Utilities Services (RUS) is amended

Title 7 CFR Chapter XVII, Part 1728, Electric Standards and

Specification for Materials and Construction, by revising RUS Bulletin

Topic Pipeline Safety: Grant of Waiver; Tractebel Power, Inc.

Date-Document-Sources 4/21/2005 05–8011 DOT TEXT PDF

Standard Ref standard API 5L compliant interstate natural gas pipeline ASME) standard ASME B31.8

(ASTM) standards ASTM A 358 and A 999

Discussion TPI petitioned RSPA/OPS for a waiver from compliance with the gas

pipeline safety regulations at 49 CFR 192.113 to allow it to employ a

1.0 longitudinal joint factor (LJF) for austenitic stainless steel

pipe. TPI requested the waiver because it intends to install a 96 mile,

Note The pipeline meets the requirements of the U.S. Navy and

is a low magnetic permeability pipe material;

The pipeline is manufactured to the American Society for

Testing and Materials (ASTM) standards ASTM A 358 and A 999;

Topic Notice of public meeting

Date-Document-Sources 4/21/2005 05–8026 AMC TEXT PDF

Standard Ref issues selected by the Commission in its January 13 and March 24, 2005, meetings

Discussion The Antitrust Modernization Commission will hold a public

meeting on May 9, 2005. The purpose of the meeting is for the Antitrust

Modernization Commission to approve plans (including proposed requests

for public comment and public hearings) for studying issues selected by

Note : The purpose of this meeting is for the

Antitrust Modernization Commission to approve plans prepared by its

study groups for studying issues selected by the Commission in its

January 13 and March 24, 2005, meetings, including proposed requests

Topic Application for Permanent Variance and Interim Order, Grant of Interim Order, and

Request for Comments

Date-Document-Sources 4/21/2005 05–7999 OSHA TEXT PDF

Standard Ref Operate on the ``broken rope principle'' defined in section 3

(``Definitions'') of ANSI standard A10.22-1990 (R1998);

Discussion International Chimney Corporation, Karrena International, LLC,

and Matrix Service Industrial Contractors, Inc. (``the employers'')

have applied for a permanent variance from the provisions of the OSHA

standards that regulate boatswains' chairs and hoist towers,

Note (i) Conduct static drop tests of each personnel cage, and these

tests must/would comply with the definition of ``static drop test''

specified by section 3 (``Definitions'') and the static drop-test

procedures provided in section 13 (``Inspections and Tests'') of

Topic FMVSS No. 403, Platform lift systems for motor vehicles

Date-Document-Sources 4/22/2005 05–8068 NHTSA TEXT PDF

Standard Ref specific requirements on vehicle manufacturers

or alterers who install platform lifts in new vehicles.

Discussion Title: 49 CFR 571.403, Platform lift systems for motor vehicles and

49 CFR 571.404, Platform lift installations in motor vehicles.

OMB Control Number: 2127-0621.

Form Number: None.

Note FMVSS No. 403, Platform lift systems for motor vehicles,

establishes minimum performance standards for platform lifts designed

for installation on motor vehicles. Its purpose is to prevent injuries

and fatalities to passengers and bystanders during the operation of

Topic Defense Federal Acquisition Regulation Supplement; Unique Item

Identification and Valuation

Date-Document-Sources 4/22/2005 05–7981 DOD TEXT PDF

Standard Ref ANSI MH 10 Data Identifiers ISO/IEC International Standard 15418

Discussion DoD has issued a final rule amending the Defense Federal

Acquisition Regulation Supplement (DFARS) to establish policy for

unique identification and valuation of items delivered under DoD

contracts.

Note (A) Data Identifiers (DIs) (Format 06) in accordance with ISO/

IEC International Standard 15418, Information Technology `` EAN/UCC

Application Identifiers and ANSI MH 10 Data Identifiers and ANSI MH

10 Data Identifiers and Maintenance.

Topic Regulatory Flexibility Act Review

of the Occupational Health Standard for Ethylene Oxide

Date-Document-Sources 4/22/2005 05–8080 OSHA TEXT PDF

Standard Ref EtO Standard is necessary to protect

employee health

Discussion The Occupational Safety and Health Administration (OSHA) has

conducted a review of its Ethylene Oxide (EtO) Standard pursuant to

section 610 of the Regulatory Flexibility Act and section 5 of

Executive Order 12866 on Regulatory Planning and Review. EtO is used as

Note OSHA published a Federal Register document requesting public

comments on the EtO Standard and specifically all issues raised by

those provisions, and held a public meeting on those matters (62 FR

28649, May 27, 1997). The Review summarizes the public comments and

Topic U.S.-Oman Free Trade Agreement—

Environmental review,

Date-Document-Sources 4/25/2005 05–8223 USTR TEXT PDF

Standard Ref United States-

Oman Free Trade Agreement

Discussion The Trade Act of 2002, signed by the

President on August 6, 2002, provides that the President shall conduct

environmental reviews of [certain] trade agreements consistent with

Executive Order 13121--Environmental Review of Trade Agreements (64 FR

Note The purpose of environmental reviews is to ensure that policymakers

and the public are informed about reasonably foreseeable environmental

impacts of trade agreements (both positive and negative), to identify

complementarities between trade and environmental objectives, and to


Добавить в свой блог или на сайт

Похожие:

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconTechnology, Trade, Legal, Regulatory Policy and Standards Related Notices February 26 March 10, 2004

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconThe National Institute of Standards and Technology (nist) is a non-regulatory federal agency within the Commerce Department’s Technology Administration. Nist’s

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconGrade-level Map of Oregon’s Common Curriculum Goals, Content Standards, and Benchmark Standards April 2003 Oregon Department of Education Science Grade-level Mapping

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconKaplan's AuditNet® Resource List (karl) April 2005 V 2005

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconClass Status Report Instructor by College Spring 2005 Undeclared Monday, April 18, 2005 11: 10: 47 am

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconClass Status Report By Part of Term Spring 2005 Undeclared Monday, April 18, 2005 11: 14: 13 am

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconBooks cataloged between January 1, 2005 – April 30, 2005

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconCurriculum vitae (April, 2005)

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconPublished in the Newsletter of edc co-ordinators, April 2005

Technology, Trade, Legal, Regulatory Policy and Standards Related Notices April 11 April 25, 2005 iconSubmission Dates April 5, August 5, and December 5, 2011 (May 7, September 7, 2011 and January 7, 2012 for Aids/Aids-Related Research)


Разместите кнопку на своём сайте:
lib.convdocs.org


База данных защищена авторским правом ©lib.convdocs.org 2012
обратиться к администрации
lib.convdocs.org
Главная страница