1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps'09)




Скачать 234.4 Kb.
Название1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps'09)
страница1/4
Дата конвертации29.10.2012
Размер234.4 Kb.
ТипДокументы
  1   2   3   4
Joint Program

Transilvania University of Brasov, Romania, September 24-26, 2009

1st Int.Conf. on MANUFACTURING ENGINEERING, QUALITY and PRODUCTION SYSTEMS (MEQAPS'09)

2nd Int.Conf. on ENVIRONMENTAL and GEOLOGICAL SCIENCE and ENGINEERING (EG'09)

2nd Int.Conf. on MARITIME and NAVAL SCIENCE and ENGINEERING (MN'09)


September 23, 2009

WELCOME COCTAIL
in the Transilvania University of Brasov


19:00-21:00


1st Day: September 24, 2009

OPENING: 09:30
by the RECTOR OF THE UNIVERSITY


PLENARY LECTURES – CONFERENCE ROOM A’

Plenary Lecture 1: 09:35-10:05



Quality Improvement in Production Systems with Modern Control Techniques for Electrical Drives
by Prof. Constantin Volosencu, “Politehnica” University of Timisoara, ROMANIA.

Plenary Lecture 2: 10:05-10:35



Design Criteria and Solutions for the NERVA Solid Rocket Cluster
by Prof. Radu D. Rugescu, University Politehnica Bucharest, ROMANIA and Texas A&M University, USA.

Plenary Lecture 3: 10:35-11:05



Open Source ERP
by Prof. Claudia-Georgeta Carstea, “George Baritiu” University, ROMANIA.

Plenary Lecture 4: 11:05-11:35



Experimental and Numerical Aspects Concerning the Electromagnetic Shielding in Microwaves Range
by Assoc. Prof. Dumitru Cazacu, The University of Pitesti, ROMANIA.



Coffee-Break: 11:35-12:00


Plenary Lecture 5: 12:00-12:30



Intelligent Systems and their Reliability in Real-Life Applications
by Prof. Adnan Khashman, Near East University, N. CYPRUS

Plenary Lecture 6: 12:30 - 13:00



The Development of Numerical Modeling in Turkey: Coastal Engineering Problems
by Assist. Prof. Asu Inan, Technology Gazi University, TURKEY.

Plenary Lecture 7: 13:00-13:30





New Teaching Methods for Marine Engineer University Studies
by Prof. Jose A. Orosa, Department of Energy and Marine Propulsion, SPAIN.

Plenary Lecture 8: 13:30-14:00



A New Frontier in Marine Technology – Gas Hydrates, as a Source of Energy and as a Means of Natural Gas Transportation
by Prof. Deniz Unsalan, Piri Reis University, TURKEY.

Plenary Lecture 9: 14:00-14:30


A Generalized Mathematical Model for the Analysis of Sediment Basins by Prof. Razvan Raducanu, Al. I. Cuza University, ROMANIA.


15:00 – 17:00

CONFERENCE ROOM A’

CONFERENCE: EG’09

SESSION: MANAGEMENT and TECHNOLOGY of ENERGY SYSTEMS

Chair: Dumitru Cazacu




Virtual Prototyping of a New Tracking System

Daniela Ciobanu, Ion Visa, Dorin Diaconescu, Radu Saulescu

625-220

Energetically Efficient Heating Radiant Systems Using Advanced Composite Materials

Dorin Rosu, Horatiu Teodorescu-Draghicescu, Sorin Vlase, Anca Stanciu, Violeta Guiman

625-297

Studies on the Design of a Wind Turbine with Vertical Axis and with a Helical Rotor Shape

Nicolae Mugea, Badea Lepadatescu, Constantin Buzatu, Cristian Toma Mugea, Enescu Ioan

625-252

Heat Pump Laboratory

Ioan Boian, Alexandru Serban, Macedon Moldovan, Florin Chiriac

625-214

First Romanian Passive Office Building in Bragadiru

Ruxandra Crutescu, Marin Crutescu

625-279

Beam Horizontal Irradiance Simulation for Brasov Urban Area - Clear Sky Model

Elena Eftimie

625-278

Study Case of a Heat Pump Installation with Horizontal Ground Heat Exchangers

Marius Mantulescu, Stan Fota, Ioan Tuns

625-317

Coffee-Break: 17:00-17:30


15:00 – 17:00

CONFERENCE ROOM B’

CONFERENCE: MEQAPS’09:

SESSION: MANUFACTURING SYSTEMS

Chair: Asu Inan




Integrated CAD-CAM-CAE for Complex-Shape Aircraft Gas Turbine Parts

Dan Mircea Ionescu, Radu Rugescu

625-190

Analysis on Grinding media Motion in Ball Mill by Discrete Element Method

Yi Sun, Mingfeng Dong, Yalang Mao, Difeng Fan

625-192

Hierarchical manufacturing system modeling with recurrent synchronized fuzzy petri nets

Eugenia Minca, Otilia Dragomir, Florin Dragomir

625-195

LabVIEW Simulation of Indirect Field Orientation Control of an Induction Machine

Helga Silaghi, Ulrich Rohde, Marius Silaghi, Eugen Gergely

625-176

A Non-Linear Model in Grinding

Nicolae–Doru Stanescu

625-200

Multi-Item Production Inventory Systems with Budget Constraints

Zaid T. Balkhi

625-194

A Traceability Project for Digital Manufacturing Management

Radu Dobrescu, Dan Popescu, Daniel Merezeanu, Stefan Arghir

625-183



Coffee-Break: 17:00-17:30


15:00 – 17:00

CONFERENCE ROOM C’

CONFERENCE: MEQAPS’09:

SESSION: PRODUCTION SYSTEMS

Chair: Deniz Unsalan




Using of Distributed Intelligent Agents for Holonic Control of Adaptive Manufacturing Systems

Ilie Popa, Dumitru Cazacu

625-098

Vibration Monitoring for Electrical Equipment Faults Detection Using Fast Fourier Transform

Mariana Iorgulescu, Robert Beloiu, Dumitru Cazacu

625-099

Comparative Assessment of a Temperature Distribution into Different CPU Coolers

Dumitru Cazacu

625-097

Application of High Brightness LED for Shipboard Light Source

Hong-Keun Ji, Kwang-Seok Jung, Un-Yong Jang, Gyung-Suk Kil, Seong-Yeon Kim

625-235

Disinfection of Phytoplankton by Application of UV LED

Sung-Kuk Choi, Sung-Wook Kim, Dae-Won Park, Gyung-Suk Kil, Chul-Young Choi

625-237

Intelligent Classification of Sonar Images

Boran Sekeroglu

625-155

FAMR: A Neural Network with Relevance Factor for Data Mining

Lucian Sasu

625-154

Intelligent Portion Identification System for Poultry Processing Plant

Adnan Khashman, Gulsum Y. Asiksoy, Halil Fikretler

625-152

Design of a Microcontroller Based Device for Long-Term Monitoring of the Body Temperature of Patients

Dogan Ibrahim, Shahin Ahmedov, Adnan Khashman

625-151

Performance of Machining by Waterjet Erosion

Andrea Deaconescu, Tudor Deaconescu

625-226

Teledermatology based medical images with AWGN Channel in Wireless Telemedicine System

Ali Serener, Cemal Kavalcioglu

625-156

Mid-Term Planning of a Shampoo Packing System

Rabah Belaid, Vincent T'Kindt

625-135

Coffee-Break: 17:00-17:30


17:30-20:00

CONFERENCE ROOM A’

CONFERENCE: EG’09:

SESSION: ENVIRONMENTAL SYSTEMS and ENVIRONMENTAL SCIENCE


Chair: Claudia-Georgeta Carstea,




Study Regarding the Simulation of Urban Traffic Noise in Brasov City

Corneliu Cofaru, Janos Timar, Daniela Florea, Dinu Covaciu

625-223

Use of Micro-Layers of Chromium Nitrides Obtained by Chemical Vapor Deposition for Mechanical Applications and Eco-Materials

Sorin Gherghinescu

625-295

Eco-Friendly Products / Processes Environmental Impact Matrix (EFPPEI MATRIX)

Luminita Popa, Adrian Danila

625-262

Exergetic Analyses Applied in Pilot Plant for Tritium and Deuterium Separation

Sorin Gherghinescu

625-294

The Green Reform in the European Union. Financial and Fiscal Instruments for the Protection of the Environment

Ramona Ciobanu

625-222

Aspects Regarding the Improvement of Environmental Performances Using Methods of Evaluation of the Impact Associated to Environmental Aspects

Daniela Simona Moldovan

625-270

Pollutant Effects of the Natural Bacterial Leaching in the Area of Valea Sesei – Rosia Poieni

Hreniuc N. Petru, Badescu Gabriel

625-244

Changes in Diesel Engines Operational Performances during Biodiesel Usage

Dorin Dumitrascu, Nicolae Ispas, Ioana Moldoveanu

625-232

USLE Soil Erosion Model from the Experimental Formulation to the Formulation of the Theoretical Physics

Petru Cardei

625-283

The Efficient Use of the GIS Technology in Creating Strategies for Regional Development and Environment Protection

Gabriel Badescu, Ovidiu Stefan, Nicolae Afrim Bancila, Nivelt Petru Hreniuc, Eduard Keller Iulius, Adrian Traian Radulescu, Rodica Badescu

625-296


  1   2   3   4

Добавить в свой блог или на сайт

Похожие:

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\Ipap conference Series 7, Proc. 8th Int. Conf on X-ray Microscopy

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\Systems Engineering: a new Approach to Complex it-based Technological Systems in Engineering Education

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\52, 1017-1024. Agard, B. and Kusiak, A., (2004a). Data mining based methodology for the design of product families, Int. J. Production Research, 42

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\TG16 Int’l Journal of Information Systems and Supply Chain Management, 2(1), 16-33, January-March 2009

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\Aerospace, Mechanical & Manufacturing Engineering 3

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\Part time b. E. Manufacturing engineering

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\MSc Design Engineering and Manufacturing Management

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\University address: Industrial and Manufacturing Engineering

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\University address: Industrial and Manufacturing Engineering

1st Int. Conf on Manufacturing engineering, quality and production systems (meqaps\Decision support and data warehouse systems/决策支持和数据仓库系统/1st ed [Reprinted ed.]/E. G. Mallach


Разместите кнопку на своём сайте:
lib.convdocs.org


База данных защищена авторским правом ©lib.convdocs.org 2012
обратиться к администрации
lib.convdocs.org
Главная страница