Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner




Скачать 28.21 Kb.
НазваниеOptimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner
Дата конвертации01.11.2012
Размер28.21 Kb.
ТипДокументы

References

  1. Alaa.R.Kazim, (2004) “A study on Design parameter of Plate-Fin-And-Tube Direct Expansion Evaporator.”M.Sc. Thesis, University of Technology, Mech.Eng.




  1. Anand, N.K., and Tree, D.R., 1982,”Steady state Simulation of a Single Tube-Finned Condenser Heat Exchanger.” ASHRAE Transactions, Vol.88, Part2, pp.185-200




  1. ASHRAE Handbook, 1997 fundamentals. American Society of Heating, Refrigeration and Air-Conditioning Engineers.




  1. ASHRAE Handbook, 1998 Refrigeration. American Society of Heating, Refrigeration and Air-Conditioning Engineers.




  1. ASHRAE Handbook, 1999 Heating Ventilating and Air-Conditioning Application. American Society of Heating, Refrigeration and Air-Conditioning Engineers.




  1. ASHRAE Handbook, 2000 Heating Ventilating and Air-Conditioning Systems and Equipment. American Society of Heating, Refrigeration and Air-Conditioning Engineers.




  1. Aspelund, K.A., 2001 “Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant R-410a Air-Conditioner.” M.Sc. Thesis, Georgia Institute of Technology.




  1. Bivens, D. B., Shiflett, M. B., Wells, W. D., Shealy, G. S., Yokozeki, A., Patron, D. M.,Kolliopoulos, K. A., Allgood, C. C., and Chisolm, T. E. C., 1995. “HFC-22 Alternatives for Air Conditioners and Heat Pumps,” ASHRAE Transactions, vol. 101, pt. 2, pp. 1065-1071.




  1. Chen, Z.H.; and Lins, P.A., 1990, “A Correlation for Metastable Flow of Refrigerant-12 through Capillary Tube.” ASHRAE transactions, Vol.96, Part 1, pp.542-549.




  1. Chi, K., Wang, C. C. Chang, Y.J., and Chang, Y.P., 1998.” A Comparison study of Compact Plate Fin-and-Tube Heat Exchangers.” ASHRAE Transactions, Vol. 104, No.2, pp.548-555 Quoted by Alaa(2004).




  1. Chitti M.S., Anand, N.K, 1996 “Condensation Heat Transfer Inside Smooth Horizontal Tubes for R-22 and R-32/125 Mixture.” HVAC and Research, Vol. 2, No.1, pp.79-100.




  1. Chunlu Zhang and Guoliang Ding, 2003,”Approximate analytic solutions of adiabatic capillary tube.” International journal of refrigeration, Vol. 27, Elsevier Sci Ltd Exetre Engl.pp.17-24




  1. Chun-Lu Zhang, 2004,” Intensive parameter analysis of adiabatic capillary tube using approximate analytic solution.” International journal of refrigeration, Vol.27, Elsevier Sci Ltd Exetre Engl.pp456-463




  1. Chwaloski, M; Didion, D.A.; and Domnaski, P.A., 1989,” Verification of Evaporator Computer Models and Analysis of Performance of an Evaporator Coil” ASHRAE Transactions, Vol.95, Part 1, pp.1229-1236.




  1. Corberan, Jose M.; and Melon Monica G., 1998 “Modelling of Plate Finned Tube Evaporators and Condensers Working with R-134a.” International journal of refrigeration, Vol.21, No.4, Jun, Elsevier Sic Ltd Exeter Eng1.pp.273-284.




  1. Dabiri and Rice, 1981, “A Compressor Simulation Model With Corrections For The Level of Suction Gas Superheat.” ASHRAE Transactions, Vol.87, Part 2.




  1. Domanski,P.A.; and Didion D.A.,1984,”Mathmatical Model of an Air-to-Air Heat Pump Equipped with a Capillary Tube” International Journal or Refrigeration, Vol.7,No.4,July,pp.249-255




  1. Domanski, P.A. and Didion, D.A., 1993. “Thermodynamic Evaluation of R-22 Alternative Refrigerants and Refrigerant Mixtures,” ASHRAE Transactions, vol.99, pt. 2, pp. 627-635




  1. Ellison,R.D.; and Creswick, F.A.,1978,”A Computer Simulation of Steady State Performance of Air-to-Air Heat Pumps. “Oak Ridge National Laboratory Number ORNL/CON-16




  1. Ellison, R.D.; Creswick, F.A.; Fischer, S.K.; and Jackson, W.L., 1981,”A Computer Model for Air-Cooled Refrigerant Condenser with Specified Refrigerant Circuiting.” ASHRAE Transactions, Vol.87, Part 1, pp.1086-1106.




  1. Fisher, S.K.; and Rice, C.K., 1983,”Steady State Computer Design Model For Air-to-Air Heat Pumps.” Oak Ridge National Laboratory Number ORNL/CON-80/R1.




  1. Goldstein, P.E., 1981,”A Computer Simulation Method for Describing Two-Phase Flashing Flow in Small Diameter Tubes.” ASHRAE Transactions, Vol.87, Part 2, pp.51-60




  1. Hamilton, J.F.; and Miller, J.L., 1990,”A Simulation Program for Modelling an Air-Conditioning System.” ASHRAE Transactions, Vol.96, Part2, pp.213-221




  1. Hassin, B.A., 1997, “Simulation of thermo-fluid Compression Process.” M.Sc. thesis, University of Baghdad, Mech.Eng.




  1. Hazim, H.n., 2000,” Component Matching of a Simple Vapor Compression Refrigeration System.”M.Sc.Thesis, University of Baghdad, Mech.Eng.




  1. Hedderitch, C.P.; Kelleher, M.D.; and Vanderplaats,G.N., 1982,”Design and Optimization of Air-Cooled Heat Exchangers” Journal of Heat Transfer, November 1982, Vol.104, pp.683-690




  1. Hussain, R.M., 1998,”A Numerical Simulation of Vapor Compression Refrigerant Cycle Using Alternative Refrigerants.”Ph.D.Thesis University of Baghdad, Mech.Eng.




  1. Jangho Lee and Piotr A.Domanski, 1997. “Impact of Air and Refrigerant Misdistributions on the performance of finned-tube evaporators with R-22 and R-407C” Building Environmental Division National Institute of Standards and Technology




  1. kays, W.M., and London, A.L., 1984,”Compact Heat Exchanger.” McGraw Hill, New York.




  1. Koizumi, H; and Yokoyama, K., 1980,”Characterstics of Refrigerant Flow in a Capillary Tube.” ASHRAE Transactions, Vol.86, Part 2, pp.719-729




  1. Kondepudi, S. N., 1993. “Drop-In Testing of R-32 Blends as R-22 Alternatives in aSplit-System Air Conditioner,” ASHRAE Transactions, vol. 99, pt. 2, pp. 406-413.




  1. Krakow, K.I.;and Bin,S,1990,”Secondary Heat Transfer in Heat Pumps.” ASHRAE Transaction, Vol.96, Part 1, pp.312-323




  1. Kuehl, S.J.; and Goldschmidt, V.W., 1990, “Steady Flows of R-22 through capillary Tubes: Test Data.” ASHRAE Transactions, Vol.96, Part 1, pp. 719-729




  1. Li, R.Y.; Lin, S.; and Chen, Z.H., 1990,” Numerical Modelling of Thermodynamic Non-Equilibrium Flow of Refrigerant through Capillary Tubes. ASHRAE Transactions, Vol.96, Part 1, pp.542-550




  1. Man-Hoe Kim, Piotr A.Domanski and David A. Didion, 1997.”Performance of R-22 Alternative Refrigerants in a System with Cross-flow and Counter-flow Heat Exchangers” United States Department of Commerce Technology Administration National Institute of Standards and Technology




  1. Monte. F, 2002 “Calculation of thermodynamic properties of R407C and R410A by the Martin-Hou equation of state-part I: theoretical development.” International Journal of Refrigeration, Vol. 25, pp. 306-313.




  1. Montreal Protocol on Substances That Deplete the Ozone Layer.” Refrigeration, Air-conditioning, Heat Pumps Technical Options Committee.” Canada, January, 2003




  1. Olivier Zurcher; John R.Thome; Daniel Favrat, 1998”In-Tube Flow Boiling of R-407C and R-407C/Oil Mixtures Part 2Plain Tube Results and Predictions.” HVAC and Research, Vol.4, No 4, pp.373-399.




  1. Oskarson,S.P.; Krakow, K.I.; and Lin, S., 1990a “Evaporator Models for Operation with Dry, Wet, and Frosted Finned Surfaces: Part 1-Heat Transfer and Fluid Flow Theory.” ASHRAE Transaction, Vol.96, Part 1, pp.373-380




  1. Oskarson,S.P.; Krakow, K.I.; and Lin, S., 1990b “Evaporator Models for Operation with Dry, Wet, and Frosted Finned Surfaces: Part 2-Evaporator Models and Verifications.” ASHRAE Transaction, Vol.96, Part 1, pp.373-380




  1. Radermacher, R. and Jung, D., 1991. “Theoretical Analysis for Replacement Refrigerants for R-22 for Residential Uses,” U.S. Environmental Protection Agency Report, US EPA/400/1-91/041.




  1. Rich, D.G., 1973, “The Effect of Fin Spacing on the heat Transfer and Friction Performance of Multi-Rows, Smooth Plate Fin-and-Tube Heat Exchangers.” ASHRAE Transactions, Vol.82, Part 2, pp.487-501




  1. Rich, D.G., 1976, “Computer-Aided Design of Direct Expansion Evaporator Coils.” ASHRAE Transactions, Vol.82, Part 1, pp.487-501




  1. Rice C.K, Ellison R.D, Fisher S.K, Jackson W.L, 1981 “Design Optimization of Conventional Heat Pumps: Application to Steady-State Heating Efficiency” ASHRAE Transactions, Vol 87, part 2, pp.10371055.




  1. Saddler, E. M., 2000 “Optimization of a Finned-Tube Condenser for a Residential Air-Conditioner Using R-22.” M.Sc. Thesis, Georgia Institute of Technology, Atlanta, GA




  1. Shepherd, D. G., 1956.” Performance of One-Row Tube Coils with Thin Plate Fins.” Heating, Piping, & Air Conditioning, Vol. 28, No.4, pp.137-144, Quoted by Wright (2000)




  1. Stewart, S.W; Aspelund, K.A.; Wright, M.F; Sadler, E.M.; and Shelton, S.V.; 2002, “Residential Air Conditioner Finned-Tube Condenser Heat Exchanger Optimization.” Georgia Institute of Technology, Department of Mechanical Engineering Atlanta, GA.,

  2. Stocker, W.F., 1988, Refrigeration and Air-Conditioning., 2nd ed. International Student Edition, McGraw-Hill




  1. Susan W.Stewart., 2003” Enhanced Finned-Tube Condenser Design And Optimization” PhD Thesis Georgia Institute of Technology




  1. Villadsen, V., and Boldvig, F.V., 1981”Reciprocating Compressor Design for High Efficiency.”ASHRAE Transactions, Vol.87, Part2, pp.819-825




  1. Wang, C. C., Lee, C. J., Chang, C. T., and Chang Y.J., 1999.” Some Aspects of Plate fin-and-tube Heat exchanger with and without Louvers.” J. Enhanced Heat Transfer, Vol.6, no.5, pp.375-368, quoted by Alaa (2004)




  1. Wright, M. F., 2000, “Plate-Fin-and-Tube Condenser performance and Design for Refrigerant R-410a Air-Conditioner.” M.Sc. Thesis Georgia Institute of Technology.




  1. انكروبيرا فرانك ب, ودووت د يفيد ب" اسس انتقال الحرارة " ترجمة الدكتور صالح اسماعيل نجم و اخرون- وزارة التعليم العالي و البحث العلمي – جامعة البصرة – المكتبة الوطنية في بغداد 1986 .




  1. احمد عبد النبي عمران, 2001 " في مقارنة اداء مائعي تثليج فريون 290 و 22 منظومة تثليج انظغاطية و دراسة تأثيرهما على الانبوب الشعري " رسالة ماجستير, قسم هندسة المكائن و المعدات الجامعة التكنلوجية.







Добавить в свой блог или на сайт

Похожие:

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconStudy of the Condenser Performance in Al-Nassiriyah Thermal Power Plant

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconDesign and optimization of a mixed flow compressor impeller using robust design methods

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconFin 456/Fin 556 – International Financial Management

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconDesign and Performance Standards

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconModeling, simulation and design optimization of a permanent magnet linear generator for wave energy

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconResearch Design in Human Movement and Performance

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconKrallis, A., Pladis, P., Kanellopoulos and Kiparissides, C. “Development of Advanced Computer-Aided Software Tools for Design, Simulation and Optimization of

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconA practical Introduction to Preliminary Design of Air Breathing Engines”

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconPerformance analysis and design of a small wind turbine for developing countries

Optimization of Plate-Fin-and-Tube Condenser performance and Design for Refrigerant r-410a Air-Conditioner iconInternational conference on performancebased design in earthquake geotechnical engineering  from case history to practice


Разместите кнопку на своём сайте:
lib.convdocs.org


База данных защищена авторским правом ©lib.convdocs.org 2012
обратиться к администрации
lib.convdocs.org
Главная страница